|
|||||||
|
|
|
|||||
|
|
|||||||
AVIMAR
VALVES
Heavy Duty Swing-Out Valves
The heavy-duty valve is designed for
the harsh realities of today’s fire service when water contaminants challenge a
valve’s sealing capabilities.
Available in 1" to 3 1/2" sizes
90° handle travel
Nickel-Chrome plated brass ball
provides longer valve life and improved sealing abilities
Flow optimization reduces turbulence
while in the gated position and requires lower operating forces
No lubrication or regular
maintenance required
Simple two seated design (no O-Rings
to cut or lose during assembly or maintenance)
Designed and tested to exceed NFPA
requirements
Cast, machined and assembled Ohio
Model: AB-8800
Heavy Duty Swing-Out Valve
Series “Self-Locking Valves”
Use with the R-1 Handle for remote
operation and the TS and TSC Handles for direct operation
Model: AB-8600
Heavy Duty Swing-Out Valve Series
Use with SZ Twist Lock Handle,
Manual Gear Actuator, Electric Actuator or Rack and Sector
Heavy Duty 4 " Swing-Out
Valve with new Flat Ball Design
Heavy Duty 4" Valve
Designed for tank to pump use, deck
gun or other higher flow applications
New flat ball concept - Flat ball
has spherical seating surface that easily closes and seals on the seat
Air, manual gear or electric
actuation
Short body length - Only 4" long.
Can be used on side discharge
applications and in restricted pump compartment space
Numerous valve adapters
Easy to operate - New sealing system
requires less torque to open and close the valve
Reduced gear ratios
Electric: 25:1 ratio - 8 seconds
full open to close - Handwheel 50:1 ratio - 12 1/2 turns
Small 6" chrome handwheel
Swing-Out Valves
Model: AB-7600
Series “Non-Locking Valves”
Model: AB-7800
Series “Self-Locking Valves”
Replaced by Heavy Duty Swing-Out
Valves (8600 & 8800 Series).
Conversion kits are available to
update these valves.
Butterfly & Relief Valves
Piston Intake Valve
Model: AB-7980
Black Max Piston Intake Valve
Corrosion resistant stainless steel
and poly-impregnated aluminum are combined for a more durable Piston Intake
Valve.
A large unique oval waterway
increases efficiency while reducing the overall size.
All this, plus a special 10 year
warranty against corrosion makes the Black Max the obvious choice for today’s
fire service.
7 psi friction loss at 2000 gpm (.5
bar at 7600 lpm)
Polymer Piston for improved
corrosion resistance
Larger waterway with cast-in turning
vane for reduced turbulence and more efficient flow
Compact size - Extends only 11
15/16" from the pump panel
Built-in adjustable pressure relief
valve, 53° elbow and 3/4" air bleeder valve
Outlet (pump side) options: 5" or 6"
female swivel
Inlet (hose side) options:
4", 5" or 6" storz (cap & chain
optional)
4" or 5" full time storz swivel
4", 4 1/2", 5" or 6" male
4", 4 1/2" or 5" female swivel
Height: 18 7/8" / Width: 9 9/16" /
Depth: 11 15/16"
Weight: 30 lbs.
Butterfly Valves
Available in 4", 4 1/2", 5", and 6"
full flow sizes.
Operates to 250 psi and meets NFPA
1901 standard for opening and closing speed when used with either a handwheel
gear operator, air or electric actuator.
A manual handle is available for
dump valve applications.
The all aluminum body has a 3/4"
drain port on all male, storz and victaulic inlet bodies.
Various adapters available
including: female rocker lug and long handle, female NPT, male, victaulic and
storz.
Model: AB-7940
4" Butterfly Valve
Length: 9 1/2", weight: 21 3/4 lbs.
Model: AB-7945
4 1/2" Butterfly Valve (5" Body)
Length: 9 3/4", weight: 27 1/4 lbs.
Model: AB-7950
5" Butterfly Valve
Length: 10", weight: 28 1/2 lbs.
Model: AB-7960
6" Butterfly Valve
Length: 10", weight: 35 1/2 lbs.
Intake Pressure Relief Valve
Model: AB-59
Intake Pressure Relief Valve
Designed to mount on main pump
intake using four bolts on a 4 3/8" bolt circle.
Adjustable pressure settings from
50-175 psi.
Available with 2.5" NPT, 2.5" NH or
2.5" victaulic outlet.
Weight: 14 3/8 lbs.
Hydrant & Gate Valves
Hydrant Valves
Model: AB-627
4-Way Hydrant Valve
This valve allows you to get water
to the fire at hydrant pressure, while waiting for a second pumper to hook up
and increase flow and pressure.
Pyrolite® finish
Flow efficient 3 1/2" waterway
1000 gpm (3800 lpm) flow capacity
Two 2 1/2"-5" discharges
One 2 1/2"-5" intake
One 4"-5" hydrant intake
4" or 5" storz available
Model: AB-637
4-Way Hydrant Valve Bracket
For horizontal or vertical mounting
the Style AB-627 4-Way Hydrant Valve for more secure transport and storage.
Model: AB-1828
2 1/2" Hydrant Valve
For 2 1/2" hydrant connections.
A full flow valve with a Tork-Lok®
handle for more positive handle positioning.
Pyrolite finish
Adapter easily removed for seat
adjustment
2 1/2" female inlet x 2 1/2" male
outlet
Gate Valves
Model: AB-285
2 1/2" Gate Valve
A brass heavy-duty wedge seat gate
valve with a non-rising stem and crank handle for easier operation at standard
operating pressures.
Cast or chrome trim
2 1/2" female inlet x 2 1/2" male
outlet
Model: AB-2285
2 1/2" Gate Valve
Same as Style 285, except in
Pyrolite
Also available with 3" inlet and
outlet
Model: Ab-2286
3 1/2" Gate Valve
Less than 1 psi friction loss @ 1500
gpm
Lightweight Pyrolite construction 9
1/2 lbs.
Also available in 3" - 5" threaded
or 4" - 5" storz
GATED WYES
Pyrolite Wyes
Model: AB-1581
Leader Line Wye
2 1/2" female inlet x two 1 1/2"
male outlets
Self-locking Tork-Lok® handles for
more positive handle positioning
Model: AB-2580
1 1/2" Wye
1 1/2" female inlet x two 1 1/2" or
1" male outlets
Model: AB-2581
Leader Line Wye
2 1/2" female inlet x two 1 1/2"
male outlets
Model: AB-1582
Hydrant Wye
2 1/2" to 6" female or 4" or 5"
storz inlet x two 2 1/2" male outlets
Self-locking Tork-Lok handles for
more positive handle positioning
Model: AB-2582
3-Way Hydrant Wye
2 1/2" to 6" female or 4" or 5"
storz inlet x three 2 1/2" male outlets
Self-locking Tork-Lok handles for
more positive handle positioning
Brass Wyes
Model: AB-1480
1 1/2" Wye
Cast brass or chrome plated trim
1 1/2" female inlet x two 1 1/2"
male outlets
Model: AB-1482
Hydrant Wye
Cast brass or chrome plated trim
Tork-Lok handles for more positive
handle positioning
2 1/2" to 6" female inlet x two 2
1/2" male outlets
Model: AB-2681
Leader Line Wye
Designed for heavy-duty use in
severe environments.
Cast brass
2 1/2" female inlet x two 1 1/2"
male outlets
Siamese Wyes
Siamese with quarter-turn valves
provide a more positive shutoff and easier operation.
All 2 1/2" swivel inlets are
supplied with strainers.
Model: AB-1583
Suction Siamese
Used on pumper suction or aerial
platform inlets.
Features Tork-Lok® handles for more
positive handle positioning.
Pyrolite® finish
Two 2 1/2" female inlets x 2 1/2" to
6" female or male or 4" or 5" storz outlet
Model: AB-2583
3-Way Suction Siamese
Used on pumper suction or aerial
platform inlets.
Features Tork-Lok handles for more
positive handle positioning.
Pyrolite finish
Three 2 1/2" female inlets x 2 1/2"
to 6" female or male or 4" or 5” storz outlet
Model: AB-1483
Suction Siamese
Cast brass or chrome plated trim
Two 2 1/2" female inlets x 21/2" to
6" female or male outlet
Tork-Lok handles for more positive
handle positioning
Used on pumper suction or aerial
platform inlets
Clappered Siamese
Clapper Valve Siamese
A brass Clapper Siamese with a
rubber carrying handle and 3/4" drain plug.
Cast brass or chrome plated trim
Two 2 1/2" female inlets x 2 1/2" or
3" male outlet
Model: AB-266
Clapper Valve Siamese
A brass Clapper Siamese in sizes up
to 6".
Cast brass or chrome plated trim
Two 2 1/2" female inlets x 3" to 6"
female outlet
Model: AB-1262
Clapper Valve Siamese
A Pyrolite Clapper Siamese includes
a Style 4 Drainit Drain Valve and a rubber carrying handle.
Two 2 1/2" female inlets x 2 1/2" or
3" male outlet
Model: AB-1267
Clapper Valve Siamese
A Pyrolite Clapper Siamese includes
a Style 4 Drainit Drain Valve and a rubber carrying handle.
Two 2 1/2" female inlets x 2 1/2" to
6" female, 3 1/2" to 6" male, or 4" or 5" storz outlet
Plain Wyes
Model:AB-260
Plain Wye
Cast brass or chrome plated trim
2 1/2" to 6" female inlet x two 1 1/2" or 2
1/2" male outlets
Model: AB-1260
Plain Wye
Pyrolite finish
2 1/2" to 6" female inlet x two 2 1/2" male
outlets
WATER THIEFS
Model: AB-1573
Water Thief
Designed for extending 1 1/2" or 2 1/2" lines without interfering with
the operation of other lines
Pyrolite finish
2 1/2" female inlet x one 2 1/2" and two 1 1/2" male outlets
Self-locking Tork-Lok handles for more positive handle positioning
Additional Links
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Please contact us :
avimar@usa.net
