|
|||||||
|
|
|
|||||
|
|
|||||||
AVIMAR
|
GLOVES |
"FIRE FIGHTING" FIREMAN GLOVES
9000 Series
Durable KANGAROO Leather Palm
coupled with soft Elkskin back for the most comfortable structural fire glove in
the industry!
Crosstech Barrier model is compliant
to both NFPA standards:
NFPA 1971 Structural and NFPA 1951
USAR.
Kangaroo leather with Eversoft
tanning repels water and remains soft after repeated use.
Kangaroo leather is extremely
durable for long life and better slash resistance.
35% Kevlar Thermal Lining offers
superior slash resistance.
Crosstech™ Moisture Barrier or
Polyurethane Moisture Barrier
Available in seven (7) sizes -
XS, S, M, L, XL, 2XL, 3XL.
9500
Crosstech barrier with knitwrist - STRUCTURAL AND USAR COMPLIANT.
9550
Crosstech barrier with leather gauntlet cuff - STRUCTURAL
only.
9100
Polyurethane barrier with knitwrist
9150
Polyurethane barrier with leather gauntlet cuff
Meets the requirements of NFPA 1971, Standard on Protective Ensemble for
Structural Fire Fighting, 2000 Edition; NFPA 1951, Standard on Protective
Ensemble for USAR Operations, 2001 Edition (Crosstech barrier knitwrist model
only); NFPA 1500; U.S. Dept. of Labor OSHA Bloodborne Pathogens Standard Title
29 CFR; and CAL-OSHA Standard Title 8 Section 3046
7000 Series
POLYURETHANE inserts
Economical polyurethane moisture
barrier meets all NFPA liquid, chemical, and bloodborne pathogen penetration
requirements.
Barrier and SEF Modacrylic thermal
lining are permanently bonded, then sewn to the glove shell..
7500
2-ply Nomex/Spandex Knitwrist
7550
Leather gauntlet cuff
Meets the requirements of NFPA 1971, Standard on Protective Ensemble for
Structural Fire Fighting, 2000 Edition; NFPA 1500; U.S. Dept. of Labor OSHA
Bloodborne Pathogens Standard Title 29 CFR; and CAL-OSHA Standard Title 8
Section 3046
6000 Series
CROSSTECH® glove inserts by W.L.
Gore & Associates
High vapor permeability reduces
steam burns.
Protects against bloodborne
pathogens and several common chemicals required by the NFPA.
Jet black cowhide shells won't show
dirt and soot.
Specially tanned EVERSOFT leather
stays soft, repels water.
Increased dexterity, reduced overall
weight.
6500
2-ply Nomex/Spandex Knitwrist
6550
Leather gauntlet cuff
Meets the requirements of NFPA 1971, Standard on Protective
Ensemble for Structural Fire Fighting, 2000 Edition; NFPA 1500; U.S. Dept. of
Labor OSHA Bloodborne Pathogens Standard Title 29 CFR; and CAL-OSHA Standard
Title 8 Section 3046
6400 Eclipse Crosstech
Unique utility cuff can be worn as
knitwrist or gauntlet and allows rapid donning of wet glove.
Highly flexible gold elkskin leather
on glove back fights hand fatigue.
Reinforcement strip increases
dexterity and wraps around glove to protect first knuckle.
Glove design delivers superior
overall fit; anatomically-correct thumb to finger action and innovative
wrap-around index finger provide excellent dexterity.
Reinforcement strip and durable navy
cowhide palm keep gloves on the job longer.
Utility cuff incorporates a leather
retaining band that acts as a 360-degree pull tab to prevent tearing of
knitwrist when donning and holds wet gloves open for faster drying.
Specially tanned THERMO leather
stays soft.
Increased dexterity, reduced overall
weight.
Crosstech Glove Insert from W.L.
Gore & Associates
Meets the requirements of NFPA 1971, Standard on Protective
Ensemble for Structural Fire Fighting, 2000 Edition; NFPA 1500; U.S. Dept. of
Labor OSHA Bloodborne Pathogens Standard Title 29 CFR; and CAL-OSHA Standard
Title 8 Section 3046
5000 Series
POLYURETHANE inserts
All elk leather
Economical polyurethane moisture
barrier meets all NFPA liquid, chemical, and bloodborne pathogen penetration
requirements.
Barrier and SEF Modacrylic thermal
lining are permanently bonded, then sewn to the glove shell..
5500 - 4K3
3-ply Kevlar Knitwrist
5550
Gauntlet cuff
Meets the requirements of NFPA 1971, Standard on Protective
Ensemble for Structural Fire Fighting, 2000 Edition; NFPA 1500; U.S. Dept. of
Labor OSHA Bloodborne Pathogens Standard Title 29 CFR; and CAL-OSHA Standard
Title 8 Section 3046
5400 Eclipse
Unique utility cuff can be worn as
knitwrist or gauntlet and allows rapid donning of wet glove.
Highly flexible gold elkskin leather
on glove back fights hand fatigue.
Reinforcement strip increases
dexterity and wraps around glove to protect first knuckle.
Glove design delivers superior
overall fit; anatomically-correct thumb to finger action and innovative
wrap-around index finger provide excellent dexterity.
Reinforcement strip and durable
emerald-green cowhide palm (navy blue cowhide palm on Crosstech style) keep
gloves on the job longer.
Utility cuff incorporates a leather
retaining band that acts as a 360-degree pull tab to prevent tearing of
knitwrist when donning and holds wet gloves open for faster drying.
Specially tanned THERMO leather
stays soft.
Increased dexterity, reduced overall
weight.
4500X-4N2 Wildland
CAL/OSHA
Black leather with 2-ply
Nomex/Spandex knitwrist.
Sizes S, M, L, XL, 2XL
2-ply Nomex/Spandex Knitwrist
3000 Series
CAL/OSHA
Blue leather with SEF modacrylic
lining and no liquid barrier.
Sizes XS, S, M, L, XL, 2XL
DIVER GLOVES
Gold Gripper Glove
This glove is easily recognized by
its exclusive gold gripper palm.
The 5mm and 7mm models utilize a
special dual-density finger design to improve dexterity.
All models feature a Velcro® wrist
closure.
Sizes: XXS - XL
Product available in 3mm , 5 mm, 7
mm thicknesses
Gold Gauntlet 5 Finger Glove
A full 7mm thickness with a generous gauntlet cuff, great for extreme conditions
and for use with drysuits.
Sizes: S - XL
Product available in 7 mm thickness
Gold Gauntle Mitt
A full 7mm thickness with a generous gauntlet cuff, great for extreme conditions
and for use with drysuits.
Sizes: S - XL
Product available in7 mm following thickness
Lycra Tropic Glove
This is a must have for any warm water diver.
Great protection, superior comfort.
Sizes: Sizes: XXS - XL
Trilam Glove
A Nylon/Lycra exterior coupled with a comfortable fleece lining makes this glove
a standout in warm water.
They even come in handy topside on cold days, a windproof - breathable membrane
keeps your hands warm.
Sizes: XS - XXL
Neoprene Gripper Velcro Glove
This is our most popular selling glove.
It’s known for its comfort, durability and style.
The 5 & 7mm models feature dual density fingers for ease of movement.
Sizes: Sizes: XS - XXL
Product available in 3mm, 5mm, 7 mm thicknesses
Neoprene Gripper Zipper Glove
Same great features as our Gripper Velcro Glove but with a non-corrosive heavy
duty zipper closure.
Sizes: Sizes: XS - XXL
Product available in 3mm, 5mm, 7 mm thicknesses
Duratex Gripper Glove
The most durable glove, the perfect choice for divers who need a glove that will
hold up in the toughest conditions, Velcro® wrist closure
Sizes: Sizes: XS - XXL
Product available in 5mm thickness
Duratex Dry Glove
Perfect for extreme conditions and for use with drysuits.
Durable grip palm, waterproof seams, and skin wrists
Sizes: XS - XXL
Product available in 5mm thickness
Hypherstretch Glove
Comes in 3, 5, and 7 mm thicknesses.
Durable palm grip.
Glued & sewn seams.
Sizes: XXS - XL
Hot Skin Tropic Glove
Selected by Rodale’s Scuba Diving Magazine as the Best in the Sport.
This is a must have for any warm water diver.
Great protection, superior comfort.
Sizes: Sizes: XXS - XL
Specialist™
Neoprene Rescue Dive Gloves - NR209
The NR209 is
a rugged neoprene rescue glove designed for water rescues and use in inclement
weather.
Like a wet suit, the 2mm thick red and black neoprene traps the heat
and protects the hands from the cold.
The durable gray Clarino synthetic leather
reinforced palm protects against abrasions and provides a sure grip on wet
surfaces.
Our Powershield™ liner can be worn underneath to give added cut
protection when handling those sharp objects.
The Velcro closure on the extended
wrist allows for a secure and comfortable fit.
• Red and black neoprene with a gray Clarino synthetic leather palm
Wide Velcro closure for secure fit
2mm neoprene on the back of hands
Available in sizes xsm to xxl
Made in USA
Specialist™
Neoprene Rescue Dive Gloves - NR309
The NR309 is a rugged
neoprene rescue glove designed for water rescues and use in inclement weather.
Like a wet suit, the 2mm thick neoprene traps the heat and protects the hands
from the cold.
The durable black Clarino synthetic leather reinforced palm
protects against abrasions and provides a sure grip on wet surfaces.
Unlike its
counter part, the NR209, this glove has a thin layer of neoprene in the palm for
added warmth and protection.
The Velcro closure on the extended wrist allows for
a secure and comfortable fit.
All black in color
Clarino synthetic leather palm
Lined with an additional thin layer of neoprene in palm
Non-slip Toughtek™ patches on all five fingertips
2mm neoprene on the back of hands
Wide Velcro closure for secure fit
Available in sizes xsm to xxl
Made in USA
GLOVES
for
Military - Commando - Police - Flyer -
Driver - Medical - Industrial etc.
NEOPRENE
GLOVES - 430
Synthetic leather fell palms
Toughtek non-slip material on fingers tips for hand gun control
Neoprene backs
Like a wet suit, these gloves trap your body heat to keep your hands warm in
cold and wet conditions
Can be used submerged in water
Available in size X-Small thru X-Large
Made in Italy
NEOPRENE
GLOVES - 480
Synthetic leather fell palms
Neoprene backs
Like a wet suit, these gloves trap your body heat to keep your hands warm in
cold and wet conditions
Can be used submerged in water
Available in size X-Small thru X-Large
Made in Italy
WINTER NEOPRENE
GLOVES - 122
Synthetic leather fell palms
Toughtek non-slip material on fingers tips for hand gun control
Neoprene backs
Dual inner inside linings of THINISULATE and HIPPORA
Like a wet suit, these gloves trap your body heat to keep your hands warm in
cold and wet conditions
Can be used submerged in water
Available in size X-Small thru X-Large
Made in Italy
ALL NEOPRENE
GLOVES - 490
All Neoprene
Toughtek non-slip material on fingers tips for hand gun control
Like a wet suit, these gloves trap your body heat to keep your hands warm in
cold and wet conditions
Can be used submerged in water
Available in size X-Small thru X-Large
Made in Italy
FLIGHT NEOPRENE
GLOVES - 450
Synthetic leather fell palms
Extend wrist cuff -Neoprene backs
Like a wet suit, these gloves trap your body heat to keep your hands warm in
cold and wet conditions
Can be used submerged in water
Double reinforced sticking
Available in size Small thru X-Large
Made in Italy
DEFENDER GLOVES -
400
Durable cowhide leather
8oz. Of fine steel shot packed into knuckles of each glove
Extended wrists
Available in size Small thru X-Large
Made in Italy
KEVLAR
GLOVES - K300
Durable cowhide leather
Full Inner lining made of 100% Kevlar knit
Good for year round protection
Laboratory cut resistance test
Available in size Small thru X-Large
Made in Italy
KEVLAR
SWAT GLOVES - 220
100% Kevlar
Water resistant kangaroo leather on palms
Kevlar is 4 times more resistant to cut than leather as well as heat and flash
protection to 800°F
Finger cuttable on the index allows optional removal for trigger operation
without unraveling the remaining edge
A second layer of leather in the palm provides additional grip and it is cut
economically to prevent bunching while clenching objects.
Color: Sage and Black
Available in size Small thru X-Large
Made in Italy
KEVLAR
SWAT
GLOVES - 250
100% Kevlar
Water resistant kangaroo leather on palms
Kevlar is 4 times more resistant to cut than leather as well as heat and flash
protection to 800° F
Finger cuttable on the index allows optional removal for trigger operation
without unraveling the remaining edge
A second layer of leather in the palm provides additional grip and it is cut
ergonomically to prevent bunching while clenching objects.
Color: Sage and Black
Available in size Small thru X-Large
Made in Italy
NOMEX GLOVES -
200 SAGE
100% Nomex on backs of hands and
arms
Soft sheepskin leather on palms
100% Nomex on backs of hands and arms
Soft sheepskin leather on palms
Double reinforced sticking
Nomex thread
Highly heat and fire resistant up to 700 degrees F
Color: Sage green
Available in size Small thru X-Large
Made in Italy
NOMEX
GLOVES - 200 BLACK
100% Nomex on backs of hands and
arms
Soft sheepskin leather on palms
Double reinforced sticking
Nomex thread
Highly heat and fire resistant up to 700 degrees F
Color: Black
Available in size Small thru X-Large
Made in Italy
ROPE
KEVLAR GLOVES - 18
Extreme durable cowhide leather
An extra layer of leather is and Kevlar sewn into the palm to withstand the
stresses of rapid rappels and increase the grip
A Velcro closure ensures a snug fit
Available in sizes Small thru X-large
Made in Italy
SWAT
GLOVES - 10
Durable cow hide leather
Knuckles and backs of hands protected with shock absorbing foam
1/2 finger design for finger dexterity
Additional layer of leather in palms for rapid rappels
Velcro closure for secure fit
Available in size Small thru X-Large
Made in Italy
SWAT
GLOVES - 25
Durable cowhide leather
Knuckles and backs of hands protected with shock absorbing foam
Index finger without padding for trigger control
Full finger design for total hand protection
Additional layer of leather in palms for rapid rappels
Velcro closure for secure fit
Available in size Small thru XX-Large
Made in Italy
SWAT
GLOVES - 30
Durable cowhide leather
Knuckles and backs of hands protected with shock absorbing foam
Index finger without padding for trigger control
Full finger design for total hand protection
Additional layer of leather in palms for rapid rappels
Velcro closure for secure fit
Available in size Small thru XX-Large
Made in Italy
SWAT
GLOVES - 35
Almara high resistant
Knuckles and backs of hands protected
Full finger design for total hand protection
Additional layer of leather in palm for rapid rappels
Ideal for land or water ops.
Velcro closure for secure fit
Available in Size Small thru X-Large
Made in Italy
GORE-TEX
GLOVES - GXV
Reinforced Gore-tex
Sheepskin leather for reinforce on palm
Full finger design for total hand protection
Index finger without padding for trigger control
Velcro closure
Color: Olive drab
Available in size Small thru X-Large
Made in Italy
GORE-TEX
GLOVES - GXB
Reinforced Gore-tex
Sheepskin leather for reinforce on palm
Full finger design for total hand protection
Index finger without padding for trigger control
Velcro closure
Color: Black
Available in size Small thru X-Large
Made in Italy
GORE-TEX
GLOVES with THINSULATE - GTV
Reinforced Gore-tex -Inner
lining THINSULATE
Sheepskin leather for r einforce on palm
Full finger design for total hand protection
Index finger without padding for trigger control
Velcro closure
Color: Olive drab
Available in size Small thru X-Large
Made in Italy
GORE-TEX
GLOVES with THINSULATE- GTB
Reinforced Gore-tex
Inner lining THINSULATE
Sheepskin leather for reinforce on palm
Full finger design for total hand protection
Index finger without padding for trigger control
Velcro closure
Color: Black
Available in size Small thru X-Large
Made in Italy
UNIFORM
GLOVES - 600
First quality leather
Classic style for uniform unlined
Right price/good quality
Color: Black
Available in size XS thru XL
Made in Italy
UNIFORM
GLOVES - 610
First quality leather
Classic style for uniform unlined
Right price/good quality
Color: Brown
Available in size XS thru XL
Made in Italy
UNIFORM
GLOVES - 650
First quality leather
Classic style for uniform with lining
Right price/good quality
Available in size S thru XL
Made in Italy
UNIFORM
GLOVES - 680
First quality leather
Short style for uniform unlined
The wrist-length elasticized cuff provides
every snug fit and will not interference with your jacket
Right price/good quality
Color: Black
Available in size S thru XL
Made in Italy
CYCLING
GLOVES - 500
1/2 finger soft sheepskin leather gloves
Open knuckles on back of hand
Velcro closure
Color: Black
Available in size S thru XL
Made in Italy
PUNCTURE
RESISTANCE GLOVES - 800
Patented
Toughness 100 times more puncture resistant and 5 times more cut resistant than
other aramid gloves.
TurtleSkin gloves offer the highest performance against punctures, cuts and
abrasion while remaining lightweight and comfortable.
Its patented fabric is constructed of the tightest weave ever achieved in Kevlar®
fiber from Dupont, giving it protective
properties that far exceed typical aramid gloves.
It Is the only flexible material that helps protect hands from needle
sticks, metal shards
and glass fragments
while remaining only
as thick as three sheets of paper.
TurtleSkin gloves can be machine washed, unlike many other gloves which must be discarded
when they become
dirty or come into contact with infectious waste or bodily fluids.
Available in size Small thru X-Large
Made in Italy
Grenadier’s
Glove - GKG100
The Grenadier’s glove is designed by SWAT
operators, for SWAT operators.
It is designed for deploying flash-bangs and
performing other critical tactical operations.
The entire shell is constructed with KEVLAR® fabric by DuPont™ that provides
twice the cut-resistance of leather as well as heat and flame protection to 800°F
(427°C) and is sewn together with non-melting nylon thread. An elasticized
wrist keeps the glove taut, while the elasticized gauntlet keeps out foreign
objects and prevents snagging.
Cut-ring stitching allows optional removal of the
index finger for trigger control, without unraveling the remaining edge.
The palm and inside of the fingers feature a secondary layer of drum-dyed
cowhide.
Posi-Grip™ non-skid material in the cradle of the hand provides a
confident grip when using weapons or tools.
Available in black only, sizes sm-xxlg
Patents pending
Made in USA
Operator
"Shorty" Tactical Glove - SOG-L50
The Operator™ "Shorty" is
shortened, wrist-length version of our popular SOG-L100 Operator Tactical Glove
for those who do not need the additional gauntlet protection.
The Shorty’s DuPont™ KEVLAR® construction provides 4 times the cut-resistance of
leather as well as heat and flash protection to 800°F (427°C).
The entire glove is sewn with non-melting nylon
thread.
Water resistant kangaroo leather palms provide
superior abrasion and cut resistance.
An elasticized wrist
keeps the Operator™ taut. Cut-ring stitching allows optional removal of the
index finger for trigger control, without unraveling the remaining edge.
A second layer of leather in the palm provides additional protection and is
ergonomically cut to prevent bunching while clenching objects.
Foam padding in
the heel of the palm cushions the shock of firearm recoil.
Posi-Grip™ non-skid
material in the cradle of the hand provides a confident grip when using weapons
or tools.
Available in black SOG-L50 or sage green SOG-L75, sizes sm-xxlg
Patents Pending.
Made in USA
Sage
Green Operator "Shorty" Tactical Glove - SOG-L75
The Operator™ "Shorty" is
shortened, wrist-length version of our popular SOG-L100 Operator Tactical Glove
for those who do not need the additional gauntlet protection.
The Shorty’s DuPont™ KEVLAR® construction provides 4 times the
cut-resistance of leather as well as heat and flash protection to 800°F (427°C).
The entire glove is sewn with non-melting nylon thread. Water resistant kangaroo
leather palms provide superior abrasion and cut resistance.
An elasticized wrist
keeps the Operator™ taut.
Cut-ring stitching allows optional removal of the
index finger for trigger control, without unraveling the remaining edge.
A second layer of leather in the palm provides additional protection and is
ergonomically cut to prevent bunching while clenching objects.
Foam padding in
the heel of the palm cushions the shock of firearm recoil.
Posi-Grip™ non-skid
material in the cradle of the hand provides a confident grip when using weapons
or tools.
Made in USA
Operator™ Tactical Glove - SOG-L100
The Operator™ is designed by and specifically for
SWAT use and allows you to perform with surgical precision.
The ergonomic fit
tactile sensation and features found in The Operator are unmatched.
The Operator’s DuPont™ KEVLAR® construction provides 4 times the
cut-resistance of leather as well as heat and flash protection to 800°F (427°C).
The entire glove is sewn with non-melting nylon thread.
Water resistant kangaroo
leather palms provide superior abrasion and cut resistance.
An elasticized wrist
keeps the Operator taut, while the elasticized gauntlet keeps out foreign
objects and prevents snagging.
Cut-ring stitching allows optional removal of the
index finger for trigger control, without unraveling the remaining edge.
A second layer of leather in the palm provides additional protection and is
ergonomically cut to prevent bunching while clenching objects.
Foam padding in
the heel of the palm cushions the shock of firearm recoil.
Posi-Grip™ non-skid
material in the cradle of the hand provides a confident grip when using weapons
or tools.
Available in black (SOG-L100), sage green (SOG-L150), or desert tan
(SOG-L200*)
Available in sizes sm-xxlg
Patents Pending
Made in USA
Sage
Green Operator Tactical Glove - SOG-L150
The
Operator™ is designed by and specifically for SWAT use and allows you to
perform with surgical precision.
The ergonomic fit tactile sensation and
features found in The Operator are unmatched.
The Operator’s DuPont™ KEVLAR® construction provides 4 times the
cut-resistance of leather as well as heat and flash protection to 800°F (427°C).
The entire glove is sewn with non-melting nylon thread.
Water resistant kangaroo
leather palms provide superior abrasion and cut resistance.
An elasticized wrist
keeps the Operator taut, while the elasticized gauntlet keeps out foreign
objects and prevents snagging.
Cut-ring stitching allows optional removal of the
index finger for trigger control, without unraveling the remaining edge.
A second layer of leather in the palm provides additional protection and is
ergonomically cut to prevent bunching while clenching objects.
Foam padding in
the heel of the palm cushions the shock of firearm recoil.
Posi-Grip™ non-skid
material in the cradle of the hand provides a confident grip when using weapons
or tools.
Available in sizes sm-xxlg
Made in USA
Desert
Tan Operator™ Tactical Gloves - SOG-L200
The Operator™ is designed by and specifically for
SWAT use and allows you to perform with surgical precision.
The ergonomic fit
tactile sensation and features found in The Operator are unmatched.
The SOG-L200’s DuPont™ NOMEX® and KEVLAR® blend construction provides
cut-resistance as well as heat and flash protection to 800°F (427°C).
The
entire glove is sewn with non-melting nylon thread.
Water resistant kangaroo
leather palms provide superior abrasion and cut resistance.
An elasticized wrist
keeps the Operator taut, while the elasticized gauntlet keeps out foreign
objects and prevents snagging.
Cut-ring stitching allows optional removal of the
index finger for trigger control, without unraveling the remaining edge.
A second layer of leather in the palm provides additional protection and is
ergonomically cut to prevent bunching while clenching objects.
Foam padding in
the heel of the palm cushions the shock of firearm recoil.
Posi-Grip™ non-skid
material in the cradle of the hand provides a confident grip when using weapons
or tools.
Available in sizes sm-xxlg
Made in USA
Flight
Gloves with NOMEX® - BNG190
The BNG190
has been modeled to US military specifications in virtually every detail, while
being the most affordable on the market.
It has become an essential piece of
equipment for SWAT teams, military units and law enforcement agencies around the
world.
The flight glove is constructed with a 100% DuPont™ NOMEX® fabric back
that is heat and flash resistant to 800°F (427°C),
features a soft cowhide
palm and is sewn with non-melting NOMEX® thread.
Black, available in sizes sm-xxlg.
Made in USA
Flight
Gloves with NOMEX® - BNG190
The BNG190
has been modeled to US military specifications in virtually every detail, while
being the most affordable on the market.
It has become an essential piece of
equipment for SWAT teams, military units and law enforcement agencies around the
world.
The flight glove is constructed with a 100% DuPont™ NOMEX® fabric back
that is heat and flash resistant to 800°F (427°C),
features a soft cowhide
palm and is sewn with non-melting NOMEX® thread.
Black, available in sizes sm-xxlg.
Made in USA
OD
(sage) Green Flight Gloves with NOMEX® - BNG200
The BNG200
has been modeled to US military specifications in virtually every detail, while
being the most affordable on the market.
It has become an essential piece of
equipment for SWAT teams, military units and law enforcement agencies around the
world.
The flight glove is constructed with a 100% DuPont™ NOMEX® fabric back
that is heat and flash resistant to 800°F (427°C),
features a soft cowhide
palm and is sewn with non-melting NOMEX® thread.
Constructed to US Military Specification G-81188B
Also available in black (BNG190)
Available in sizes sm-xxlg
Made in USA
Flight
Gloves with KEVLAR® - KFG1000
KFG1000
Flight Gloves are designed to meet the most rigorous tactical demands.
They are identical in appearance to our
BNG190 Flight Gloves with NOMEX®, but feature 100% KEVLAR® by DuPont™
over the entire glove for added
cut-resistance and flash protection.
KFG1000s are heat and fire resistant up to 800°F (427°C),
making them ideal for deploying flash bangs or performing other extreme tactical
maneuvers.
Double reinforced KEVLAR® stitching and soft sheepskin palms provide
additional reinforcement and excellent grip.
Available in sizes sm-xxlg
Made in USA
Shooting
Gloves with KEVLAR® - KSG500
KSG500s are
extremely lightweight, comfortable shooting gloves designed for use in SWAT and
tactical operations and modeled after our flight glove with a 4" shorter
cuff.
Cut resistant DuPont™ KEVLAR® on the back of the hand provides heat and
flash resistance to 800°F (427°C).
The form fitting design of the KSG500,
combined with a durable cowhide leather palm, provide excellent tactility
dexterity and grip for high performance shooting.
The short, open cuff allows
easy pull-on and removal.
Available in sizes sm-xxl
Made in USA
SWAT Fast
Rope Glove - BFR10
The BFR10 is an essential
piece of equipment for those working in SWAT or rescue operations.
Soft, but
extremely durable cowhide leather provides a comfortable fit and excellent
protection.
An extra layer of leather is sewn into the palm to withstand the
stresses of rapid rappels and increase grip.
The cuff features an elastic
gathering.
Black with black palm reinforcement
Available in sizes sm-xxlg
Made in USA
SWAT Fast
Rope Glove - RFR30
The RFR30 is an essential
piece of equipment for those working in SWAT and rescue operations.
Soft, but
extremely durable cowhide leather provides a comfortable fit and excellent
protection.
An extra layer of leather is sewn into the palm to withstand the
stresses of rapid rappels and increase grip.
The cuff features an elastic
gathering.
Rust color with tan palm reinforcement
Available in sizes sm-xxlg
Made in USA
SWAT Fast
Rope Glove - WFR20
The WFR20 is
an essential piece of equipment for those working in SWAT or operations.
Soft,
but extremely durable cowhide leather provides a comfortable fit and excellent
protection.
An extra layer of leather is sewn into the palm to withstand the
stresses of rapid rappels and increase grip.
The cuff features an elastic
gathering.
White with tan palm reinforcement
Available in sizes sm-xxlg
Made in USA
Reactor
Rappel Gloves - LR10
A half
fingered version of the LR25, the LR10 is designed for use in tactical
operations.
This is a cutting edge rappelling/shooting glove.
This glove is made
of durable cowhide leather and built to last.
Features include shock-absorbing
foam on the back of the hand and fingers, as well as an additional layer of
leather in the palms for added protection during rapid rappels.
A Velcro®
closure on the wrist insures a snug, comfortable fit.
Durable cowhide leather
Fingers and back of hand protected with shock-absorbing foam
Half finger design for maximum dexterity
Additional layer of leather in palms for rapid rappels
Velcro® closure on wrist for secure fit
Available in sizes sm-xxl
Made in USA
Reactor
Rappel Gloves - LR25
Designed for use in tactical
operations, the LR25 is the ultimate rappelling/shooting glove.
This glove is
made of durable cowhide leather and built to last.
Features include shock-absorbing foam on the back of
the hand and fingers, an additional layer of leather in the palms for added
protection during rapid rappels and
an unpadded index finger to allow for maximum
trigger control.
A Velcro® closure on the
wrist insures a snug, comfortable fit.
Durable cowhide leather
Knuckles and back of hand protected with shock-absorbing foam
Index finger unpadded for better trigger control
Additional layer of leather in palms for rapid rappels
Velcro® closure on wrist for secure fit
Available in sizes sm-xxl
Made in USA
Defender
Gloves w/ Steel Shot - SP99
The SP99
Defender duty glove is made exclusively for use in Law Enforcement.
Eight ounces
of fine steel shot (superior to that of powdered lead) is sewn into the top of
the hand and knuckles.
The Defender is made from durable cowhide leather and
features an extended, loose cuff to make pulling on or removing quick and easy.
Made of durable cowhide leather
8oz. of fine steel shot packed into knuckles
Extended wrists
Loose cuff for easy removal
Available in sizes xsm-xxl
Made for Law Enforcement use only
Made in USA
Dura-Thin
Police Search Duty Glove with Cotton/Acrylic Lining - SG20PL
Dura-Thin
Police Search Duty Glove with Cotton/Acrylic Lining
The SG20PL Dura-Thin Police
Search Duty Glove is the lined version of extremely popular SG20P.
It features a cotton/acrylic blend inner liner for added warmth and is still
thin enough to provide the needed dexterity for shooting, searching,
handcuffing, driving, etc.
Like the SG20P, the SG20PL is made with a soft, durable drum-dyed cowhide
leather shell.
The wrist length elasticized cuff provides a very snug fit and will not
interfere with your jacket or shirt cuff.
Durable, soft drum-dyed cowhide leather shell
Wrist length elasticized cuff
Cotton/acrylic blend inner lining for moderate warmth
Available in female sizes sm & med, male sizes xsm-xxl
Made in USA
Frisk
‘Em Lined Leather Duty Glove - SG20PLZ
The SG20PLZ
is a lined version of SG40PZ duty glove.
Like the SG40PZ, it is constructed of durable, soft, drum-dyed cowhide leather
and has reinforced stitching.
It also features an extended wrist cuff with a
zipper closure on top to make pulling-on and removing easy.
A thin cotton/acrylic blend inner lining adds comfort and provides moderate
warmth,
yet still allows the feel and dexterity necessary for shooting,
searching, handcuffing, driving, etc.
Durable, soft drum-dyed cowhide leather shell
Reinforced stitching
Cotton/acrylic blend inner lining for moderate warmth
Extended wrist cuff with zipper closure
Available in female sizes sm & med, male sizes xsm-xxl
Made in USA
Dura-Thin
Police Search Duty Glove with Nylon Lining- SG50LT
The SG50LT Dura-Thin Police
Search Duty Glove gives a moderate level of hand protection,
while still being
thin enough to provide the needed dexterity for shooting, searching and driving.
A soft, durable cowhide leather shell and thin nylon/tricot inner lining makes
this glove ideal for year round use.
The wrist length elasticized cuff provides
a very snug fit and will not interfere with your jacket or shirt cuff.
Durable, soft cowhide leather shell
Wrist length elasticized cuff
Thin nylon/tricot inner lining
Ideal for use year round
Available in female sizes sm & med, male sizes xsm-xxl
Made in USA
Patrolman™
with American Deerskin - MW988D
The MW988D
Patrolman™ is a favorite of the Highway Patrol and motorcycle patrolmen.
It is
made entirely of American Deerskin hides, which are cut thin enough to allow
ample dexterity for duty use.
You will appreciate the rugged but durable look
and soft comfortable feel offers.
Black in color
Shell constructed entirely of American Deerskin
Unlined with an extended wrist cuff
Available in sizes xsm-xxl
Made in USA
Patrolman™
with American Deerskin - MW988 Gold
The gold/tan version of our
MW988D Patrolman™ is modeled after the black MW988D.
The gold/tan color was
chosen to match the tan uniforms worn by many Highway Patrol officers throughout
the United States.
It is constructed entirely of American Deerskin hides, which
are cut thin enough to allow ample dexterity for duty use.
You will appreciate the rugged but durable look and soft comfortable feel
offers.
Gold/tan in color
Constructed entirely from American Deerskin
Unlined with an extended wrist cuff
Available in sizes xsm to xxl
Made in USA
Dura-Thin
Unlined Police Search Duty Glove - SG20P
The SG20P Dura-Thin Unlined
Police Search Duty Glove is one of the best selling gloves for Law Enforcement
of all time.
It is constructed from soft, durable cowhide leather that is
"second-skin-thin".
This allows for superior feel and dexterity while
shooting, searching, handcuffing or driving.
The wrist length elasticized cuff
provides a very snug fit and will not interfere with your jacket or shirt cuff.
A more economical alternative to our SMX80
Durable, soft, "second-skin-thin" cowhide leather shell
Wrist length elasticized cuff
Available in female sizes sm & med, male sizes xsm-xxl
Made in USA
Dura-Thin
Unlined Police Search Duty Glove - SG20PB
This is a chestnut brown
version of the SG20P Dura-Thin Unlined Police Search Duty Glove, one of the best
selling gloves for Law Enforcement of all time.
The SG20PB is made of soft,
durable cowhide leather that is "second-skin- thin".
This allows for
superior feel and dexterity while shooting, searching, handcuffing or driving.
The wrist length elasticized cuff provides a very snug fit and will not
interfere with your jacket or shirt cuff.
Chestnut brown color
Durable, soft, "second-skin-thin" cowhide leather shell
Wrist length elasticized cuff
A more economical alternative to our SMX80
Available in female sizes sm & med, male sizes xsm-xxl
Made in USA
Frisk
‘Em Unlined Duty Glove - SG20PZ
The SG40PZ
Frisk ‘Em unlined glove is an attractive, durable duty glove.
It is
constructed from soft, drum-dyed cowhide leather with reinforced stitching.
Features include an extended wrist cuff with a zipper closure on the top, making
pulling-on and removing easy.
This glove is unlined in order to provide the
highest level of dexterity possible for shooting, searching, handcuffing,
driving, etc.
Made of durable drum-dyed cowhide leather
Reinforced stitching
Extended cuff with zipper closure on top
Snug fit
Available in sizes xsm-xxl
Made in USA
Searchmaster™
with Pittards® Cabretta Leather - SMX80
SMX80 Searchmaster™ is
truly the finest unlined police duty glove available.
To insure that the SMX80
is of the highest quality, it is manufactured with cabretta leather from the
world famous Pittards® tannery of England.
This leather shell is
"second-skin-thin" to achieve the dexterity and sensitivity necessary
for searching, shooting, cuffing or driving and is permanently treated to repel
water.
It will repel rain or perspiration and still dry soft, not losing any
dexterity or feel.
The SMX80 features a wrist length, elasticized cuff to give a
snug fit that will not interfere with jacket or shirt cuffs.
Unlined duty glove
"Second-skin-thin" shell, made of the very finest cabretta leather
from Pittards® of England
Leather is permanently treated to repel water
Wrist length elasticized cuff
Available in female sizes sm & med, male sizes xsm-xxl
Made in USA
Street
Guard™ with KEVLAR® - SGK100
The Street
Guard™ has a progressive look and features 100% DuPont™ KEVLAR®
knit in the
inside of the hand and fingers covered with synthetic leather to help prevent
cuts from sharp objects.
Posi-Grip™ non-slip material in the cradle offers
sure grip and positive weapon control.
The back is constructed of 1.5mm neoprene
and nylon spandex for a snug fit without hindering dexterity.
The spandex panels
also allow air to circulate and keep hands cooler than other cut resistant
neoprene gloves.
The outer thumb area has terry cloth for wiping away
perspiration.
A Velcro® closure keeps the Street Guard™ firmly in place.
Available in sizes xsm - xxlg
Made in USA
Friskmaster
Max™ with Powershield X3™ and Extended Cuff - SB4000
There is no
other glove made for law enforcement that is more cut resistant than the
Friskmaster Max™ with the Powershield X3™ liner.
The X3 liner is comprised
of Spectra®, fiberglass, and polyester.
This tri-blend offers 10 times the cut
resistance of 100% Spectra® of the same weight.
The FM3500 features an extended
length elasticized cuff and premium water resistant leather shell.
This glove is
cut resistant, and not cut proof.
CE cut and puncture test results are
available.
Available in size xsm-xxlg
Made in USA
NYPD
Style with Spectra® and Hydrofil® Linings - FM2100
This duty glove design is
standard issue for the N.Y.P.D.
The FM2100 is ideal for the coldest of winters,
while still allowing ample dexterity.
The shell is constructed of drum-dyed
cowhide leather with Scotchguard™ protection.
It features a cut resistant
Spectra® liner to protect the wearer from razors, knifes, glass, etc.
A warm
and soft Hydrofil® inner lining bonded to thermal foam wicks away perspiration
and maximizes warmth and comfort.
CE test results are available concerning the
cut resistant properties of the FM2100.
Premium drum-dyed cowhide leather shell with Scotchguard™
Full inner lining made of 100% Spectra® knit for cut resistance
Outer lining of insulating Hydrofil® bonded to thin charcoal foam
Extended wrist cuff
Available in sizes xsm-xxl
Made in USA
Friskmaster
Max™ with Powershield X3™ - FM3500
There is no other glove made
for law enforcement that is more cut resistant than the Friskmaster Max™ with
the Powershield X3™ liner.
The X3 liner is comprised of Spectra®, fiberglass,
and polyester.
This tri-blend offers 10 times the cut resistance of 100% Spectra®
of the same weight.
The FM3500 features a wrist length elasticized cuff and
premium leather shell with 3M Scotchguard®.
Please note this glove is cut resistant, and
not cut proof.
CE test results are available regarding the cut
and puncture resistance of the FM3500.
Premium leather shell with 3M Scotchguard®
Powershield X3™ liner comprised of Spectra®, fiberglass, and polyester
blend
10 times the cut resistance of 100% Spectra® of the same weight
Wrist length elasticized cuff
CE test results available
Available in size xsm-xxl
Made in USA
Resister™
with Kevlar® - RFK300
The RFK300 is
a favorite of duty and corrections officers everywhere.
It features a premium
leather shell and cut resistant knit liner made of 100% KEVLAR® from DuPont™.
It provides ample dexterity for everyday duties.
This glove is cut resistant,
and not cut proof.
CE cut and puncture test results are available.
Wrist length elasticized cuff
Available in sizes xsm to xxlg, female size lg
Made in USA
Friskmaster™
with Spectra® - FM2000
Protection is foremost on the
minds of law enforcement while having to face the criminal element on a day to
day basis.
With this in mind, Hatch as developed the FM2000 Friskmaster™ duty
glove with a Spectra® liner to protect against injury from razors, knives, and
other sharp objects.
Spectra® is an extraordinary super fiber produced by
Allied Signal with highly cut resistant properties.
The Spectra® yarn is
knitted into a glove liner, which is then sewn into a premium leather shell.
Please note this glove is cut resistant, and not cut proof.
CE test results are
available regarding the cut and puncture resistance of the FM2000.
Premium leather shell
Extended length wrist elasticized cuff
100% Spectra® knit liner
Twice the cut resistance of Kevlar® of the same weight
Laboratory test results available
Available in size xsm-xxl.
Made in USA
Winter
Specialist All–Weather Neoprene Shooting Glove - NS430L
The NS430L is a lined, winter
version of the NS430, most popular duty glove.
Designed specifically for
handgun use in cold and damp weather, this glove is an essential piece of
equipment for all men and women of Law Enforcement.
In addition, the NS430L
is fluid proof, preventing bloodborne pathogens from passing through the
Hipora liner.
The palm is made of Synsi-feel™ synthetic leather, which
provides excellent grip and accurate feel.
Toughtek™ non-slip patches are sewn
onto the palm and all fingertips except the index finger, to facilitate the best
possible trigger control.
Dual inner linings of Thinsulate® Insulation and
breathable, waterproof Hipora® work together to keep hands warm and dry.
A
Velcro® closure provides a snug fit.
Proven to protect against bloodborne pathogen transmission
Synthetic leather Synsi-feel™ palms
Toughtek™ non-slip material on fingertips (except index)
Neoprene back
Inner linings of Thinsulate® and breathable, waterproof Hipora®
Velcro® closure assures a snug, comfortable fit
Available in sizes xsm-xxl
Made in USA
Winter
Specialist All–Weather Neoprene Shooting Glove - NS430L
The NS430L is a lined, winter version of the
NS430 most popular duty glove.
Designed specifically for
handgun use in cold and damp weather, this glove is an essential piece of
equipment for all men and women of Law Enforcement.
In addition, the NS430L is
fluid proof, preventing bloodborne pathogens from passing through the Hipora
liner.
The palm is made of Synsi-feel™ synthetic leather, which provides
excellent grip and accurate feel.
Toughtek™ non-slip patches are sewn onto the
palm and all fingertips except the index finger, to facilitate the best possible
trigger control.
Dual inner linings of Thinsulate® Insulation and breathable,
waterproof Hipora® work together to keep hands warm and dry.
A Velcro® closure
provides a snug fit.
Proven to protect against bloodborne pathogen transmission
Synthetic leather Synsi-feel™ palms
Toughtek™ non-slip material on fingertips (except index)
Neoprene back
Inner linings of Thinsulate® and breathable, waterproof Hipora®
Velcro® closure assures a snug, comfortable fit
Available in sizes xsm-xxl
Made in USA
The
Guardian™ - BG800
The Guardian™ glove has
been designed to address the O.S.H.A. Blood borne Pathogens Standard (29CFR
1910.1030)
to protect the hands from deadly microorganisms such as HIV, TB,
Hepatitis, Staph, etc., by means of the 100% effective Hipora® liquid proof
liner.
This glove is perfect for use by the regular duty officer or EMT who
comes into contact with body fluids on a daily basis.
Wrist length elasticized cuff
Hipora® membrane which is waterproof and breathable
Black nylon tricot bonded to foam
Meets OSHA Standard for blood borne protection
Test results are available pertaining to the 100% effective nature of the
BG800
Available in sizes xs-xxl
Made in USA
Airprene
Specialist Shooting Glove - AS435
The AS435 is
a summer version of our most popular duty glove, the NS430 Neoprene Specialist.
This is an excellent summer duty glove that provides excellent grip and
dexterity, even in wet conditions.
The perforated neoprene (Airprene) shell
allows air circulation to keep your hands cool.
The palm is made of
Synsi-feel™ synthetic leather, which provides excellent grip and accurate
feel.
Toughtek™ non-slip patches are sewn onto the palm and all fingertips
except the index finger, to avoid hindering trigger control.
A Velcro® closure
keeps it comfortably and firmly in place.
Perforated neoprene (Airprene) shell
Synthetic leather Synsi-feel™ palms
Toughtek™ non-slip material on fingertips (except index) and palm
strategically placed for handgun use
Neoprene back
Velcro® closure assures a snug, comfortable fit
Available in sizes xsm-xxl
Made in USA
Patrolman™
with KEVLAR® - KPG200
The KPG200 is a form-fitting,
ergonomically-cut shooting glove that features cut resistant Kevlar protection
on the back of the hand.
A synthetic leather palm with Posi-Grip™ non-slip
material in the cradle provides a sure grip for accurate weapon control.
Available in size xsm to xxl
Made in USA
Sure Shot
Unlined Leather Shooting Glove with FLEX™ Design - BSG170
The BSG170 is
a specialized, high-quality shooting glove.
It was specifically designed to
provide the dexterity and sensitivity necessary for using firearms.
Features
include durable premium drum-dyed cowhide, cut to a thickness that ensures
maximum feel.
A Velcro® closure with an embossed Hatch logo ensures a snug,
comfortable fit.
Constructed of premium drum-dyed cowhide for softness and durability
FLEX™ design stitching
Unlined for maximum feel and dexterity
Velcro® closure with embossed Hatch logo
Available in sizes xsm-xxl
Made in USA
Elite
Marksman™ Shooter’s Glove - EM007
The Elite
Marksman is designed for the professional shooter and features only the finest
materials.
The palm is made from kangaroo leather, the strongest and most
durable leather available.
Because of its excellent strength and abrasion
resistance, we were able to cut it "second-skin" to allow maximum
tactile sensation.
For positive weapon control, the cradle area of the hand
features Posi-Grip™ non-skid material.
The breathable Schoeller®
dynamic-extreme fabric back provides a snug fit while allowing full dexterity.
A
Velcro® closure on the top of the hand keeps the Elite Marksman taut on your
hand.
Form-fitting yet flexible
Excellent tactility for weapon control
Kangaroo leather palm
Posi-Grip in cradle of hand
Schoeller® dynamic-extreme back
Available in size xsm to xxl
Made in USA
Specialist All–Weather
Neoprene Shooting Glove - NS430
The NS430 is
our most popular duty glove.
Designed specifically for all-weather handgun use,
this glove is an essential piece of equipment for all men and women of Law
Enforcement.
The palm is made of Synsi-feel™ synthetic leather, which provides
excellent grip and accurate feel.
For maximum grip, Toughtek™ non-slip patches
are sewn onto the palm and all fingertips except the index finger, to facilitate
the best possible trigger control.
A Velcro® closure keeps it comfortably and
firmly in place.
The NS430 feels like a second skin, with unmatched flexibility,
dexterity and grip.
Synthetic leather Synsi-feel™ palms
Toughtek™ non-slip material on fingertips (except index) and palm
strategically placed for handgun use
Neoprene back
Velcro® closure assures a snug, comfortable fit
Available in sizes xsm-xxl
Made in USA
Camouflage
Specialist All–Weather Neoprene Shooting Glove - NS430C
The NS430C is a camouflage
version of the NS430, our most popular duty glove.
Designed specifically for firearm use, this
glove is perfect for hunting and shooting sports.
The neoprene
backing and Synsi-feel™ synthetic leather palm are excellent for use in damp
or wet conditions.
As well, the Synsi-feel palm provides excellent grip and
accurate feel.
To maximize grip, Toughtek™ non-slip patches are sewn onto the
palm and all fingertips except the index finger, to facilitate the best possible
trigger control.
A Velcro® closure keeps it comfortably and firmly in place.
The NS430C feels like a second skin, with unmatched flexibility, dexterity and
grip.
Synthetic leather Synsi-feel™ palms
Toughtek™ non-slip material on fingertips (except index) and palm
strategically placed for handgun use
Neoprene backs
Velcro® closure assures a snug, comfortable fit
Available in sizes xsm-xxl
Made in USA
Winter
Specialist All–Weather Neoprene Shooting Glove - NS430L
The NS430L is a lined, winter
version of the NS430, our most popular duty glove.
Designed specifically for
handgun use in cold and damp weather, this glove is an essential piece of
equipment for all men and women of Law Enforcement.
In addition, the NS430L is
fluid proof, preventing bloodborne pathogens from passing through the Hipora
liner.
The palm is made of Synsi-feel™ synthetic leather, which provides
excellent grip and accurate feel.
Toughtek™ non-slip patches are sewn onto the
palm and all fingertips except the index finger, to facilitate the best possible
trigger control.
Dual inner linings of Thinsulate® Insulation and breathable,
waterproof Hipora® work together to keep hands warm and dry.
A Velcro® closure
provides a snug fit.
Proven to protect against bloodborne pathogen transmission
Synthetic leather Synsi-feel™ palms
Toughtek™ non-slip material on fingertips (except index)
Neoprene back
Inner linings of Thinsulate® and breathable, waterproof Hipora®
Velcro® closure assures a snug, comfortable fit
Available in sizes xsm-xxl
Made in USA
All-Weather
Glove with Hipora® and Thinsulate™ Insulation - MT25
Fear no
elements with MT25 All-Weather Glove.
Three layers work together to
keep hands warm and dry in the most severe conditions.
First is an inner lining
of C-100 Thinsulate™ Insulation. Second, a Helsapor® breathable, waterproof
liner keeps hands dry.
A third cotton/acrylic tricot liner provides added warmth
and protection from the elements.
Finally, these three layers are contained in a
shell of waterproofed taslon nylon and Scotchguard™ treated leather, with
leather palm reinforcement.
An elasticized cuff keeps wind out and warmth in.
Back of glove made from taslon nylon, treated to resist moisture
Palm side made of Scotchguard™ treated leather, with leather reinforcement
Inner lining of C-100 Thinsulate™ Insulation
Breathable and waterproof Hipora® secondary lining
Third lining of cotton/acrylic blend tricot
Available in sizes xsm-xxll
Made in USA
Postmaster
with Toughtek™ Fingertips and Thinsulate™ Insulation - PM555
The PM555
Postmaster is a warm and durable soft suede glove designed to keep hands
comfortable through wind, sleet and snow, when the mail must get through.
To
block out the elements, the Postmaster features an inner liner of Thinsulate™
Insulation and a cotton/acrylic blend secondary liner.
For mail sorting,
handling, and great grip in all weather conditions, Toughtek™ non- slip pads
are sewn onto the fingertips (except the pinky).
An elasticized, extended cuff
keeps cold weather out and ensures a snug, comfortable fit.
Soft suede leather shell
No slip Toughtek™ material sewn on fingertips (except pinky)
Inner lining made of C-100 Thinsulate™ Insulation
Secondary lining made of cotton/acrylic blend
Available in female sizes sm-med and male sizes xsm-xxl
Made in USA
Motorcycle
Style Gauntlet With Thinsulate™ Insulation - SG26G
The SG26G is a gauntlet style
glove designed for motorcycle officers.
It is constructed with a soft durable
cowhide leather shell.
To keep hands warm while riding in the cold winter
months, it is layered with C100 Thinsulate™ Insulation.
The back of the glove
has a contoured design for maximum hand flexibility.
For maximum all weather
protection, a Cordura nylon rain cover is tucked away in the zipper pouch
located back of each hand.
All leather construction
C100 Thinsulate™ Insulation
Extended gauntlet protects arms
Cordura nylon rain cover
Available in sizes sm-xxl
Made in USA
Leather
Dress Glove with Thinsulate™ Insulation - TLD40
Not only an attractive
uniform accessory, but extremely useful as well, the TLD40 is an ideal duty
glove for cold weather.
Hands will surely stay warm with an inner liner of
Thinsulate™ Insulation, a cotton/acrylic blend secondary liner and a durable
cowhide outer shell.
An extended, shirred wrist will help keep wind out of the
jacket cuff and allows easy removal.
Constructed of durable and soft cowhide leather
Extended, shirred wrist
Inner lining of C100 Thinsulate™ Insulation
Secondary lining of cotton/acrylic blend
Available in sizes xsm-xxl
Made in USA
Postmaster
SP3 Neoprene Postal Glove - NS430P
The Postmaster SP3 is an
extremely comfortable and flexible glove designed for all-weather postal
delivery.
The neoprene backing will protect your hand from the elements like a
wetsuit.
The synthetic leather palm provides excellent grip and accurate feel
even in wet conditions.
For maximum grip, non-slip patches are sewn onto the
tips of the index finger and thumb.
A Velcro® closure keeps it comfortably and
firmly in place.
The NS430P feels like a second skin, with unmatched
flexibility, dexterity and grip.
Synthetic leather Synsi-feel™ palms
Non-slip material on index finger and thumb
Neoprene back
Velcro® closure assures a snug, comfortable fit
Available in sizes xsm-xlg
Made in USA
Half-Finger
Postal Glove with Super Grip Dot Palm - SDP30
The SDP30 is a half-finger
version of our popular RDP55 Postal Glove.
It provides warmth, yet allows full
feel and dexterity.
The super grip dot palms are coated with black PVC dots
giving a better hold during all weather conditions.
The acrylic Lycra knit
construction with an extended cuff makes it comfortable for all-day wear.
Half finger version of RDP55 Postal Glove
Acrylic Lycra knit with extended cuff
Palm and fingers coated with black pvc dots
Available in size xsm to xlg
Made in USA
Mitten
Re-Trak Postal Glove - MG100
The MG100 is a warm,
comfortable and versatile cold weather postal glove.
It converts easily from a
full protection mitten to a half-finger glove when full touch and dexterity is
needed.
It’s lightweight C-100 Thinsulate™ Insulation breathes and keeps you
warm even in damp or wet conditions.
A tight elasticized cuff keeps out wind and snow.
Converts easily from a mitten to a half-finger glove
C-100 Thinsulate™ Insulation
Elasticized extended cuff
Available in size xsm to xlg
Made in USA
Postal
Glove with Super Grip Dot Palm - RPD55
The RDP55 is a perfect postal
glove for handling mail and packages.
The super grip dot palms are coated with
black pvc dots giving a better hold during all weather conditions.
The acrylic
Lycra knit construction with an extended cuff offers a comfortable feel and
warmth throughout the day.
Acrylic Lycra knit with extended cuff
Palm coated with black pvc dots
Available in size sm to xxl
Made in USA
Traffic
Gloves - ORG88
The ORG88 is a must for
those who work out in the field directing traffic or crowds.
The bright orange
fabric will not only help to ensure your safety by increasing your visibility in
day or night, but also allows others to read your hand signals clearly.
3M™
reflective strips around the circumference of the glove will shine back at
oncoming traffic.
Stretch nylon orange knit with elasticized wrist
Reflective strips reflect light in darkness and increase your visibility
One size fits all
Made in USA
DayNite™
Reflective Gloves - DNR100
DON’T TAKE
ANY CHANCES!
DayNite™ Reflective Gloves are a must when conducting vehicle stops or
directing traffic to ensure that passing motorists see you.
The DayNite™ is a half finger black Lycra® glove covered with patches of
Reflexite®, a retroreflective microprism material with cube-corner prisms
that
are 3-times more efficient at reflecting light than glass bead systems.
This
allows the wearer to be seen by motorists at the critical viewing distances of
100 to 600 feet.
Hold the palm outward to reveal the red "STOP" signal and use the
markers on the outside of the hand to direct traffic onward.
The stretchable Lycra® fabric allows the DayNite™ glove to be worn alone or
over other gloves when warmth or protection is needed.
Wear alone or over other gloves
Available sm/med and lg/xlg
Made in USA
Mesh Back
Cycling Glove - BR607
The BR607 is an excellent
light-duty cycling glove.
Crocheted mesh backing keeps hands comfortable and
cool.
Durable cowhide palms with reinforced foam padding provide excellent grip
while helping reduce shock to the hands and wrists.
A Velcro® closure at the
top of the wrist allows for a snug, yet comfortable fit.
Back of hand made of crocheted mesh
Palm side made from durable cowhide
Reinforced foam padded palms
Velcro® closure
Available in sizes xsm-xxl
Made in USA
Lycra/Clarino
Cycling Glove - PC290
The PC290 is a practical,
comfortable cycling glove.
Lycra backing provides a snug but forgiving fit.
Made
with Clarino synthetic leather, this glove is washable.
Reinforced foam padding
in the palm significantly reduces vibration and trauma to the hands and wrists,
while also providing excellent grip.
A terry cloth section on the back of the
thumb can be used to wipe away perspiration.
Back of hand made of Lycra
Terry cloth on back of thumb
Palm side made of washable Clarino synthetic leather
Reinforced foam padding on palms
Velcro® closure
Available in sizes xsm-xxl
Made in USA
Cycling
Glove - PC300
Designed with
the serious cyclist in mind, the PC300 is on the cutting edge of cycling gloves.
Palms padded with high-density foam and rubber Kevlar®/poly reinforcements make
the PC300 ideal for all-day or extreme cycling.
Superior quality Clarino®
synthetic leather provides excellent grip.
A comfortable fit is ensured with a
spandex back and Velcro® closure.
Cutting edge design
Half finger style
Black spandex and terry cloth back
Clarino® synthetic palm features high density closed-cell foam with rubber
Kevlar®/poly reinforcement
Velcro® closure
Available in sizes xsm-xxl
Made in USA
Full-Fingered
Cycling Glove - PC310
The PC310 is designed for
cycling in colder weather.
Lycra backs laminated to fleece provide moderate
warmth.
Palms are made of high-quality, durable Clarino® synthetic leather and
padded with open cell foam for excellent grip and shock reduction.
A terry cloth
section on the back of the thumb can be used to wipe away perspiration.
An
extended, snug fitting elasticized cuff keeps out cold air and keeps the PC310
taut on the hand.
Black Lycra backing, laminated to fleece for moderate warmth
Padded open cell foam in palms
Palms constructed of superior quality Clarino® synthetic leather
100% cotton terry on thumb backs
Extended wrists made of Lycra
Available in sizes xsm-xxl
Made in USA
Economy
Short-Fingered Driving Glove - EC1000
The EC1000 is
the economy version of our SG25SF driving glove.
This glove is constructed from
durable goatskin leather, with reinforced nylon stitching.
Holes in the top of
the hand and fingers keep hands cool.
Enjoy increased wheel grip and reduced
hand fatigue.
Half finger, durable goatskin leather
Velcro® wrist closure
Open knuckles and back of hand
Available in xsm-xxl
Made in USA
Leather
Driving Glove - SG22S
This glove is designed for
performance driving applications. The SG22S is constructed from durable goatskin
leather, with reinforced nylon stitching.
Holes in the top of the hand and
fingers keep hands cool.
Enjoy the advantages of increased wheel grip and
reduced hand fatigue.
Full finger, durable goatskin leather
Velcro® closure
Open knuckles and back of hand
Available in xsm-xxl
Made in USA
Turbo
Leather Driving Glove - SG22T
The SG22T is our
top-of-the-line driving glove.
Quality comes in the form of drum-dyed cowhide
leather and durable reinforced nylon stitching.
Holes in the top of the hand and
fingers keep hands cool.
Advantages include maximum wheel grip and reduced hand
fatigue.
This glove is a must for performance driving.
Full finger drum-dyed cowhide leather construction
Velcro® closure
Open knuckles and back of hand
Available in xsm-xxl
Made in USA
Summer
Riding Glove - SG23S
The SG23S is one of the great
enduring styles of motorcycle gloves.
Supple thin leather and breathable spandex
fourchettes keep your hands cool in even the hottest summer weather.
Extended
cuffs keep the wind out of your sleeves and reinforced palms ensure durability
and solid grip.
Soft cowhide leather
Cool breathable spandex fourchettes
Extended wrist cuff
Reinforced palms for durability
Ventilation holes on back of hand
Available in sizes xsm-xxl
Made in USA
Short-Fingered
Driving Glove - SG25SF
The SG25SF is the
short-fingered version of our popular SG22T Turbo leather driving glove.
Like
the SG22T, it is crafted from genuine cowhide leather and uses durable
reinforced nylon stitching.
Holes in the top of the hand and fingers keep hands
cool.
Advantages include maximum wheel grip and reduced hand fatigue.
This glove
is essential for performance drivers.
Half finger, drum-dyed cowhide leather construction
Velcro® closure
Open knuckles and back of hand
Available in xsm-xxl
Made in USA
Additional Links
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Please contact us :
avimar@usa.net
